Remote PM???

Why yes! I just finished cleaning the portable head. I left it in the garage a few days in hopes it would clean itself but for some reason it did not. I made an executive decision...paint or clean the head. You would think that would be a no brainer and most would opt for painting but I have been painting for two days and nights and needed a break. It actually was not that bad, the tablets I have been adding each time it was emptied and filled with fresh water kill off any smell at all and leave a somewhat pleasant smell. It is the slush, chunks and color that are less desirable. Probably TMI but thought I would share. Well at least it is done and I can get on with the more fun and enjoyable projects.

More PM

Well I guess if you can't be on the water then the next best thing is being on the boat! I finished removing all items from the boat. It is amazing how much stuff you end up with, it is equally amazing that the boat still floats with all this stuff. Anyway I began the cleansing of the interior as well as electronics musical chairs. I removed the bracket and wiring for the old fish finder to make way for the new Uniden VHF. I installed the wireless second station charging cradle on the v-berth bulkhead and could not complete the wiring because they do not include an in-line fuse. Can you believe that, you spend over a hundred bucks for a second mic and they can't even give you a 2 dollar fuse holder. It is just as well since I really should install an new buss bar with power that is always on regardless of batter selector switch position. This mic needs to recharge and there is also a need for accessory power for other devices to keep memory so I will add that to the distribution panel next time. I also decided to try replacing the gimbel pins on two of the rod holders with stainless hardware in lieu of replacing the whole rod holder. Only time will tell if this will hold up to wire line trolling which is what busted out the pins in the first place. Hopefully they will hold up that way I can order a new Avet reel instead of two rod holders. I also vacuumed the whole interior, something that was long over due. Once all the other wiring and work is done inside I will wash down all interior surfaces and oil the teak. Hopefully between working on the house and 47 days left before launch I can get all the planned projects done this time.

Interior PM This Weekend

Well the outside of the boat is done and now it is on to the pilothouse and the rest of the inside. I hope to get down this weekend to do some more work in preparation for Winter Flounder season. It is only 63 days away and you would be amazed how fast 63 days slips by when your boat is not completely ready to back in the water. It is amazing how much stuff you acquire throughout the year. I now know why my fuel consumption went up...I have about an extra 100 pounds of gear from the previous year. Anyway I will be cleaning the fiberglass interior, cushions, windows, carpets, head, teak, etc. I was thinking of trying Interlux's teak products...Premium Teak Restorer and Premium Teak Oil. Anyone have experience with them? Please post comments good or bad.